Name ornaments
Two colours, about 80 mm across, with a name, a year or a short line. For the tree, a gift bag or a stocking.
$15 each · 3 for $40
Order ornaments3D printing & scanning · Leduc, Alberta
Send a file, a sketch or the broken part. We 3D scan or model it if needed, print it in a material that suits the job, and check the fit before it leaves the shop. Pickup in Leduc, delivery around Edmonton, and shipping anywhere in Canada.
Christmas 2026
Ornaments and signs printed with the names you send, and logo gifts for your clients and crew. Made in Leduc, ready for pickup or shipped across Canada.
Two colours, about 80 mm across, with a name, a year or a short line. For the tree, a gift bag or a stocking.
$15 each · 3 for $40
Order ornamentsAbout 200 mm wide, in your colours, with your family name and the year. Stands on a mantel or a shelf.
$40
Order a signLogo keychains and mini hard-hat ornaments in your company colours, for clients, subs and crew.
Articulated dinos, flexi animals, fidgets and stocking stuffers, printed and ready to ship.
From $8
Shop ready-madePersonalized orders are paid up front by e-transfer, and we confirm the spelling with you before anything prints.
Services
Whether you have a finished file or only a broken piece in a bag, the job starts the same way: you tell us what it has to do, and we tell you what it will take. If there is no file, we can scan the part and build one.
Send an STL, 3MF or STEP. We check it for printability, pick an orientation and material with you, and quote it before anything runs.
We 3D scan the original to copy it, or model from a sketch or photos with measurements. You approve a render, then we print.
Fittings, adapters, jigs, brackets, hose and cable management, replacement clips and knobs. Built for heat, sun and shop abuse.
Name ornaments, family signs, nameplates, lithophanes from your photos and keepsakes, with up to four colours in a single print.
Logo keychains and mini hard-hat ornaments in your company colours, 20 to 100 pieces. A fixed price per piece and a one-time logo setup.
From the shop
Every job gets measured, drawn and test-fitted. When the first fit isn't right, we adjust the model and print it again.
A laser engraver's exhaust needed to turn hard against a wall. We modelled a tight elbow with a socket that slips over the machine's port and a spigot for the duct. The first fit on the duct was loose, so we took the spigot up half a millimetre and reprinted.
A single portrait turned into a thin panel that shows the picture when light shines through it. Thicker areas print darker, thinner areas glow. It stands in a matching slotted base.
A knob, a clip, a bracket, a cap for a discontinued tool. Bring it in and we'll 3D scan it, or send photos with a ruler in the shot. We'll tell you if it can be printed and what it will cost.
How it works
You approve a fixed price before anything prints. No surprises at pickup.
A file, a sketch with measurements, photos, or the part itself to scan. Tell us what it has to do and where it lives.
We recommend a material and settings and send a fixed price and a ready date, usually within one business day.
The part is printed, cleaned up and checked against your measurements or the scan. Design jobs get a render to approve first.
Pick up in Leduc by appointment, get it dropped off around Edmonton, or have it shipped anywhere in Canada.
The machines
An enclosed printer for engineering materials and big parts, a four-toolhead printer for names, logos and anything in colour, and a 3D scanner for copying parts that have no file.
Actively heated chamber for warp-prone materials like ASA and carbon-fibre nylon, a hardened hotend for abrasive filaments, and multi-colour feeding.
Four toolheads, each loaded with its own filament, so switching colours wastes no filament on purging. Names, logos and signs in up to four colours.
Handheld structured-light scanner that turns a physical part into a 3D model, in full colour. We clean up the scan, model the fit surfaces and print the copy.
A third printer, the Creality SPARKX i8, joins the shop in January 2027.
Materials
Not sure what you need? Tell us where the part lives and what it has to survive, and we'll recommend one.
| Material | Good for | Heat resistance approximate | Outdoors | Flex |
|---|---|---|---|---|
| PLAPolylactic acid | Gifts, décor, lithophanes, prototypes and multi-colour prints | ~55 °C |
Indoor | |
| PETGPolyester | Brackets, fittings, enclosures, shop and garage parts | ~70 °C |
Fair | |
| ASAOutdoor-grade ABS | Parts in sun and weather: vehicles, equipment, exterior fixtures | ~95 °C |
UV stable | |
| TPU 95AFlexible | Gaskets, bumpers, grips, feet and protective covers | ~60 °C |
Fair | |
| PA-CFCarbon-fibre nylon | Jigs, fixtures and high-load parts near engines or heat | ~120 °C |
Good |
Heat figures are approximate softening points on a 0–150 °C scale. Real limits depend on load, wall thickness and infill; we'll size the part for the job.
We'll reply with a fixed price and a ready date, usually within one business day.
We couldn't send that from here. Copy it into an email instead.
Copy it into an email to hello@gridlinecustoms.ca and attach your files. We'll reply with a quote.
FAQ
Anything else, ask in your quote request.
Business and client gift orders by Dec 4. Orders shipped anywhere in Canada by Dec 8, or Dec 12 with Expedited shipping. Local orders for pickup in Leduc by Dec 20. Last pickups are Dec 23.
STL, 3MF, OBJ and STEP. No file at all? Send photos with measurements or a ruler in the shot, or bring the part in, and we'll model it.
By the material used, the machine time and any design time. You get a fixed price to approve before anything prints, so the number on the quote is the number you pay.
Most small prints are ready a few days after you approve the quote. Larger parts and design work take longer; your quote includes a ready date.
Up to 300 × 300 × 300 mm in one piece. Larger parts can be split into sections that bolt or bond together.
Usually, yes. We 3D scan the part, or the mating part it attaches to, then clean up the model, print a replacement and check the fit. Bring all the pieces, even the broken ones.
Yes. Logo keychains and mini hard-hat ornaments in your company colours, from 20 pieces. Send your logo as an AI, SVG or PDF file. We only print logos you own or have permission to use.
For most brackets, fittings, clips and jigs, yes, in the right material with enough walls. If a part would be better machined or moulded, we'll tell you before you spend money on it.
Yes. Small runs of identical parts are a good fit, and the price per part drops as the quantity goes up.
Yes. We don't share, sell or reuse customer files or designs.
Weapons or weapon parts, and characters, logos or designs you don't have the rights to.
We're in Leduc, Alberta. Pickup is by appointment, we deliver around Nisku, Beaumont, Devon, Millet and Edmonton, and we ship anywhere in Canada. Shipping is added to your quote.